Unlike competitive units made from simple kitchen-ware, the hop rocket has been designed from the ground up as a purpose-built, heavy duty, hopback and hop infuser. This clean sheet approach means a truly superior performance and features:
*Pressure tight- up to 40 psi operation, * Holds up to 4 oz of whole hops, * 100% stainless steel construction and silicone seals, * No need to monitor wort level, will never overflow and spill, * Fully enclosed system from brew pot to fermenter means no loss of hop aroma, * Inlet at the bottom allows air to purge to reduce hot side aeration * Fine filter with wiper seals sends very clear wort to your fermenter * Course filter and cone bottom prevents wort channeling and backup for even hop utilization * Works on gravity systems and with pumps (about 4ft (1m) of static head is recommended for best gravity performance) * Doubles as an awesome hop infuser (Randalizer) for your dispensing system * It has 1/2 inch NPT connections
Dimensions: 10 inches H, 6.5 inches W (fittings to fittings)
Hop Capacity is 4 oz (whole hops or plugs)
Pressure rating is 40 psi max
Connections: 1/2 inch NPT male
Min Elevation from gravity feed: 4 ft of head recommended. You must have two of the following be504/ be505 / be506. These parts attach to the Rocket and reduce it to flare fittings and 3/8" barb or 1/2" barb. Use desired ones to connect to your system depending on how you use it. It does have 1/2 npt welded on the body of the rocket so you can use hardware store bought parts if you wish.
- Be the first to review this product